Choose the type of following :
  Product Range » JAVIC
  Silent Features »
  Javic Capacitors
  All PP Capacitors
  Advantages »
  Oil Filled Capacitors
  Manufacturing Facilities »
  Javic Capacitors
  Standard Ratings & Accessories »
  All PP Capacitors
  Oil Filled Capacitors


Oil Filled Capacitors    
Impregnation is done with the help of non-toxic friendly liquid at a very high vacuum resulting
  in following advantages:
Impregnant fluid replaces air pockets in the zinc spray and help in eliminating partial
  discharges at the end contacts. Oil impregnated capacitors have much higher partial discharge
  voltage as compared to DR TYPE. JAIVIC impregnated Oil filled Capacitors are hermetically
  sealed, hence do not have any atmospheric influence compared to DRY TYPE. Capacitor
  wound elements are encased in metal containers of adequate thickness. The containers are
  are hermetically sealed. To avoid rusting, metal containers are electroplated which also result
  in rust free attractive and durable painting.
Penetration of liquid impregnant is thorough in comparison to semi liquid impregnant like
  Polyurethane, Flexible Epoxy etc. Because of its viscous nature. This makes these capacitors
  more stable because of improved Partial Discharge Inception voltage level.
Level of liquid impregnant is maintained sufficiently above active elements, in comparison to
  semi-fluid impregnants. In liquid impregnants transfer of heat by conduction and convection
  mode is fast. This result in uniform cooling of capacitors. In turn reducing temperature rise of
  active elements. This gives an extra edge by increasing life of the capacitors and to take care
  of rugged service conditions.
With free flow of impregnant inside capacitor containers, cooling of capacitor is uniform,
  making it very suitable for tropical and super tropical conditions.
Use of Inductor Coils    
To avoid electrical and mechanical stresses on end connection by inrush current caused due to
  switching operation, our capacitors are provided with inductor coil of adequate value.
Export Worthy Packing    
To avoid damages (scratches, dents etc.) in transit, individual capacitor units are packed in
  corrugated box using thermocole packing all around the capacitors.
JAIVIC Capacitors carry ISI mark for the entire range including Banks upto 100 kVAr. JAIVIC
  Capacitors are approved & accepted by almost all the Electricity Boards govt. & Semi Govt.
  Departments, Panel Manufacturers, OEMS etc. in India.
The Company has been certified as ISO 9001 Company By. AQA International USA.
JAIVIC Shunt Power Capacitors are designed, manufactured and tested to ensure
  performance conforming to IS 13340:1993 (as amended up to date). Our standard production
  is for 415 and 440 volts, 3-phase 50Hz in ratings of 1, 2, 3, 4, 5, 6, 7, 7.5, 8, 9, 10, 12.5, 15,
  20, 25 & 30 kVAr. Higher kVAr ratings will be supplied by Banking our standard units.
JAIVIC Power Capacitors are backed by manufacturer’s warranty against manufacturing
  defects for a period of 15 months from the date of dispatch from the Factory or 12 months
  from the date of installation whichever is earlier.
JAIVIC Power Capacitors will give trouble free performance. However in the unlikely event of
  any difficulty, Jaivic’s after sales service will be readily available.
 * LP- List Price inclusive of excise duty but exclusive of sales tax or any other taxes.
For Improved power quality and reduction in energy costs. Top  
Regd.Office : 13/D Yusuf Building, Gr. Floor, 72 Mangaldas Road, Lohar Chawl, Mumbai - 400002.
* Tel. : +91 [022] 22010546 / 22092690 / 22066260 / 22067151 * Telefax : +91 [022] 22197440 / 22056141.
* Email.: / * Website :
   Created & Hosted By - MID Promoted By - GID